Best Bitcoin Wallets for Ubuntu – Linux Hint

Help with installing bitcoin-qt on ubuntu (booted from usb on a mac), from another usb

Hi everyone im quite new to bitcoin and this subreddit has been extremely helpful so thank you! Im trying to create an offline wallet and its so damn hard, since im not that good with computers... Anyways Ive been following the official guide on the bitcoin website (https://en.bitcoin.it/wiki/How_to_set_up_a_secure_offline_savings_wallet) and im on step 7 now which has been a difficult journey, (diretions on ubuntu is hard for the average user) I have downloaded bitcoin-0.8.6-linux and its on a seperate memory stick. On the read me file it says 'you need the Qt4 run-time libraries to run Bitcoin-Qt. On debian or ubuntu: 'sudo apt-get install libqtgui4'
Unpack the files into a directory and run:
-bin/32/bitcoin-qt (GUI, 32-bit) -bin/32/bitcoind (headless, 32-bit) -bin/64/bitcoin-qt (GUI, 64-bit) -bin/64/bitcoind (headless, 64-bit) '
K so typed sudo apt-get install libqtgui4 into terminal and it says 'libqtgui4 is already the newest version.' What do they mean by Unpack the files into a directory and run: ... ??
When I type -bin/64/bitcoin-qt (GUI, 64-bit) into terminal it says No such file or directory
When I double click on bitcoin-qt file it says 'Could not display "bitcoin-qt" There is no application installed for "executable" files. Do you want to search for an application to open this file? ' clicked yes then
It returns empty.
Thanks in advance for your help!
submitted by assthete to Bitcoin [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Games4coins.com .. a new service to buy Steam keys with BTX

Games4coins.com .. a new service to buy Steam keys with BTX
Artwork by Desing Team - Bitcore BTX ® 2018
Steam is a digital distribution platform developed by Valve Corporation offering digital rights management1 (DRM), multiplayer gaming and social networking services. Steam provides the user with installation and automatic updating of games on multiple computers, and community features such as friend lists and groups, cloud saving, and in-game voice and chat functionality.
If you purchase a game that uses Steam from another website as a digital download, you'll be given a product key that you use to activate the game on Steam. A Steam key is a unique code that you will use to access the full game2.
Bitcore BTX originally a hybrid fork of Bitcoin, features a proof-of work consensus mechanism and implements all of the BIPs (Bitcoin Improvement Proposals) of the Bitcoin protocol3.
Bitcore: The most clever Bitcoin fork” -- Jimmy Song, Bitcoin Core Developer
More exchanges are listing Bitcore (BTX) and businesses are adopting it. One of the latest cases of adoption of BTX is in purchasing Steam Games Key from Games4Coins.
Games4Coins is a platform that you can purchase Steam product keys. Buying a game on Games4Coins is really simple. Once you have selected a game, you can quickly and securely pay. Why we say quickly and securely? Because a powerful cryptocurrency, Bitcore (BTX) is accepted as a payment coin at this platform (Figure 1). Moreover, as a crypto, they accept only Bitcore.
Figure 1. Bitcore accepted in Games4Coins
After the transaction is complete, you gain full access to your purchased game key which is 15 letter+number code that would look something like this: 8GMR2-Q20YJ-9PDKL. Once you get that, you go into your steam app on your computer and go to Games > Activate a product on steam. Then it will have a space for you to put your code.
Bitcore is one Cryptocurrency with a big Future”. Games4Coins Team
There are totally forty seven steam games and you can pay via Bitcore for all games. Moreover the prices are very cheap, between 0.44303596 BTX and 5.41588852 BTX (Figure 2).
Figure 2. Some samples for the steam games and their price
Consequently, Bitcore is one of the best cryptos in the market. It is also one of the fastest cryptos in the market when compared to Bitcoin, Litecoin and many other top 10 cryptos. Given that transaction speeds are a factor in the applicability of crypto in real-world business usage, it then follows that Bitcore’s long-term prospects are quite good, as blockchain technology continues to gain a foothold in business. This kind of integrations could open the doors for other major businesses to adopt BTX as a payment method, further adding to the intrinsic value of this crypto. The future of Bitcore (BTX) looks great.
Author: Chris DEVTeam Bitcore | [[email protected]](mailto:[email protected])
Download PDF

GAMES4COINS HERE

References
1 https://en.wikipedia.org/wiki/Digital_rights_management
2 https://support.steampowered.com/kb_article.php?ref=5414-tfbn-1352
3 https://bitcore.cc/white-pape

https://preview.redd.it/0matv78hrml11.png?width=1440&format=png&auto=webp&s=e8596b7325dd200f5d5a098e83d9a918a7dc7848
Web: Official | News | Coin Specs | Roadmap | White Paper | Ecosystem | Network Update | Community | FAQ | Blog | TeamWallets: Windows | Win Wallet & Blockchain | Linux | Mac | iOS | Android | Eletrum | Zeltrez | Jaxx LibertyExchanges: Bit Z | Cryptopia | hitBTC | VE Bitcoin | Exrates | Crypto Bridge | QBTC | Coinexchange | Octaex | Bitexlive | Bitibu | Trade Satoshi | PayCML | ExcoincialServices: Livingroom of Satoshi | Kamoney | Cryptonaut | EasyRabBit.net | LuckyGames.io | InstaSwap Block Explorers: InsightAPI | Crypto ID | LiivenetMining Pools: Bitcorepool | Yiimp | Suprnova | Chainworks | Umine | Ant Mine Pool | Coin Miners | BSOD | BTXpool | Minersport | Omegapool | PoolGPUMarket Info: CoinMarketCap | World Coin Index | Cryptocompare Source: Github | Kryptowerk | DgCarlosLeon

submitted by dgcarlosleon to bitcore_btx [link] [comments]

Thank you for running your own VTC node and supporting VTC network! We now have 1394 Full Nodes, more than Litecoin

You guys are amazing! :) Thank you for running your own full VTC node and supporting VTC network! We now have 1394 Full Nodes :)
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Why Vertcoin? Learn about why ASIC Resistance matters! https://www.youtube.com/watch?v=UHXqfZWjuHI
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 811 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 811 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Why Vertcoin? Learn about why ASIC Resistance matters! https://www.youtube.com/watch?v=UHXqfZWjuHI
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 518 Full Nodes running.
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Q: Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers A: https://www.reddit.com/vertcoin/comments/901e6a/vertnode_an_automated_solution_for_installing/
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Official node scanner list (NOT RELIABLE, current node count could be much much higher. If you are a developer, please help us make a better Node Scanner): https://scanner.vertcoin.org/nodes
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 867 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 867 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 500+ Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 500+ Full Nodes running.
Official node scanner list (NOT RELIABLE, current node count could be much much higher. If you are a developer, please help us make a better Node Scanner): https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 900 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 900 Full Nodes running.
Official node scanner list: https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Ren | All-In-One

Ren

What is Ren? Ren is an open protocol that enables the permissionless transfer of value between any blockchain. Ren's core product, RenVM, brings interoperability to decentralized finance (DeFi).
What makes RenVM unique is that it does everything in secret using zero-knowledge proofs over an sMPC based protocol that the team has pioneered. The state, inputs, and outputs of all programs that RenVM runs are kept hidden from everyone, including the Darknodes that power it.
This allows RenVM to securely manage (ECDSA) private keys on different blockchains, making it possible to shift tokens between these blockchains in a trustless, permissionless, and decentralized way (i.e interoperability).
Technically speaking RenVM is a byzantine fault-tolerant protocol (with 1/3 malicious nodes) that does ECDSA threshold key generation and signing via sMPC. RenVM is not a product or an application in and of itself but is a network (and an accompanying SDK) that allows developers to bring interoperability to their DeFi applications.
Ren was founded in 2017 and is headquartered in Singapore.

RenVM Mainnet Is Live! 🎉

https://medium.com/renproject/renvm-mainnet-release-98cac4c6fa8e

RenBridge (dapp)| Mint BTC, BCH, and ZEC on Ethereum

https://bridge.renproject.io/

Official Resources
Darknodes
Darknodes are the physical machines that power RenVM, where every machine contributes CPU time for compute power and its disk space for storage. These are that machines that form the P2P decentralized network (not a blockchain) that cooperate to run secret multiparty computations. It is important to note that programs executing on RenVM are hidden from the Darknodes that run the virtual machine.
This guide will walk you through the installation of your Darknode. Before you begin, make sure that you have a MacOS, Windows, or Ubuntu machine available (i.e. home computer) and 100,000 REN.
Guides: How to set up a Darknode
The Team
Ren Linkedin Page
Investors
General Updates | Blog
2020 Development & Ecosystem Updates
Podcasts & Youtube videos | Chronological Order
REN Exchanges
REN Token Details
FAQ
What happened to the Republic Protocol?
Republic Protocol was rebranded to Ren to reflect the project’s evolution towards interoperability (i.e. RenVM). Old posts and discussions can be found on the Republic Protocol Reddit

Closing Thoughts

We truly appreciate our community, and this cannot be said enough. The level of technical understanding and subsequent assistance provided to our newcomers, speaks to the expertise and positivity in the community, and we couldn’t be more thankful.
We look forward to collaborating with everyone as we make our next steps forward towards building a cross-chain DeFi ecosystem. If you are interested in working directly with the Ren Team we are always looking for developers so please do reach out via the below email.
Need help or want to partner? [[email protected]](mailto:[email protected])
submitted by RENProtocol to RenProject [link] [comments]

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 450 Full Nodes running.

Thank you for running your own full Vertcoin node and supporting VTC network! We currently have 450 Full Nodes running.
https://scanner.vertcoin.org/nodes
Since every full VTC node can only serve so many clients, it's important to do your part for the Vertcoin network and run your own full node.
Q: WHAT IS A FULL NODE? A: Full nodes maintain a copy of the blockchain/ledger, distribute it to those downloading it, confirm transactions, and further spread out all of the previous functions to make the network more resilient. https://bitcoin.org/en/full-node
Q: Do I need to be a miner? A: No, you don't need to be a miner. Miners create new blocks. Full nodes simply share existing blocks (the entire VTC blockchain) with the rest of VTC wallet users.
Q: How do I run a Full VTC node on Intel NUC? A: Intel NUC Vertcoin full node installation done using Windows guide: https://github.com/vertcoin-project/VertDocs/blob/mastedocs/FullNodes/intel-nuc.md
Q: How do I run a Full VTC node? A: It's actually quite easy to do. If you run Vertcoin-QT (Vertcoin Core Wallet) on your PC/MAC desktop, keep it active in the systray. Then, make sure that you map the public port 5889 of your router to the port 5889 on the machine running Vertcoin-QT or vertcoind. For people running a public p2pool node this should be a no-brainer: you already have a synchronized vertcoind. So if you haven't opened port 5889 do it now - it's all you have to do. Your node is then public and can serve blocks and relay transactions.This makes our network much stronger and will help it to perform better. Any old or low power computer is good enough to run a full VTC node. If you have a Raspberry Pi or any old PC lying around, install vertcoind and run it in the background.
Q: How do I know if my Full Node is working correctly? A: To be a full node, you have to check to make sure you are accepting incoming connections. To do that, go under Help -> Debug Window. In the first tab, "Information", there is a Network "Number of Connections" which will show both incoming and outgoing connections. If the "In" is 0, then you are not a full node. If the "In" is greater than 0, you are acting as a full node and supporting VTC blockchain! Thank you!
Q: Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers A: https://www.reddit.com/vertcoin/comments/901e6a/vertnode_an_automated_solution_for_installing/
What is Vertcoin? | Lightning Network SEGWIT Enabled ASIC resistant money https://www.youtube.com/watch?v=86-oMyHDCNc
Official node scanner list (NOT RELIABLE, current node count could be much much higher. If you are a developer, please help us make a better Node Scanner): https://scanner.vertcoin.org/nodes
Linux instructions: https://www.cryptocurrencyfreak.com/2017/09/06/setup-vertcoin-full-node-ubuntu-16-04/
submitted by blockchaintechnology to vertcoin [link] [comments]

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

Has anyone been able to export private keys from Armory?

Hi everyone,
I am super pissed but I am going to try and keep it low key. I have a wallet that I saved in Armory years ago, and I want to move coins from it now. I had looked online a few months ago, and it said that I could export the private keys from Armory and sweep them into Electrum.
Well, today I tried it in both Armory 1.35 on Windows and the latest version on Linux. It doesn't work at all.
You can open a window after choosing to backup individual keys, and there are checkboxes there for all the different types of keys you could want, but checking and unchecking them DOES NOTHING.
All you can get is the Armory backup string for the wallet. That you already have, if you have restored the wallet from a paper backup.
Time to download all 120Gb of the blockchain I guess. Has anyone ever exported private keys from Armory? Am I doing something wrong?
Thanks.
Edit: PSA: Armory does not work at all on a fresh Ubuntu 17 install. It just fails silently and doesn't install. Neither does it work on MacOS El Capitan. On Debian 8, not all of the dependencies are installed properly during installation. I'm afraid to update my Windows copy now.
Edit: Bit the bullet and did it. Got it working on Ubuntu and found out that you have to start bitcoind in the background and play with some Armory settings to get it to run, then downloaded the whole thing from bitcoin-qt. Turns out I was right - Armory doesn't know the private keys until after it has downloaded the whole blockchain. And spent an hour chewing through transactions. AND you've restarted it twice. But I finally got them. Thanks everyone!
submitted by nkvjhi76897yeriu32gr to Bitcoin [link] [comments]

Lost most of my Doge late 2013. There may be one last solution to getting some back. Does anyone have a copy of "DogeCoin version v0.6.4.0-unk-beta" or know which release it is directly linked to?

My keys corrupted and i didn't have a recent backup, after the upgrade lost all the doges.

I think there might be one more hope of finding some, and would appreciate if anyone knows which version " v0.6.4.0-unk-beta" which is on the debug.log output.

Noticed after all this time after digging through Bitcoin release notes that before bip32/hd wallets came in or as a matter of fact As they came in too (thanks devs). Most if not everyone i asked thought backing up the wallet.dat file is good enough, or the old --salvagewallet nor -zapwalletxes. They either aggressively scrambled the wallet making it more likely destroy even more keys, sure saved a few coins but most of the addresses in the keypool which has a size of 100 didn't have a corresponding private key anywhere in the wallet AFAIKT,
Sorry before i rant, i just need some info on if this wallet if linked to a specific Dogecoin version and just happens to say v0.6.4.0 in the debug log file.

I can't update directly to any other version without the wallet breaking up. Apparently i need the exact version that was last used, and turn it off extra safely so the log files which hold some parts of the keys go back to the Wallet.dat or something.

I tried all solutions, this might just work. from the "Bitcoin version 0.7.1 Readme file."
How to Upgrade
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).
If you were running on Linux with a version that might have been compiled with a different version of Berkeley DB (for example, if you were using an Ubuntu PPA version), then run the old version again with the -detachdb argument and shut it down; if you do not, then the new version will not be able to read the database files and will exit with an error.
Explanation of -detachdb (and the new “stop true” RPC command): The Berkeley DB database library stores data in both “.dat” and “log” files, so the database is always in a consistent state, even in case of power failure or other sudden shutdown. The format of the “.dat” files is portable between different versions of Berkeley DB, but the “log” files are not– even minor version differences may have incompatible “log” files. The -detachdb option moves any pending changes from the “log” files to the “blkindex.dat” file for maximum compatibility, but makes shutdown much slower. Note that the “wallet.dat” file is always detached, and versions prior to 0.6.0 detached all databases at shutdown.
or on shut down the coin client using the -detatchdb comas coins use both log and dat files with berkeley.

Thanks,

D_M


submitted by doge_messiah to dogecoin [link] [comments]

Lore v2 QT on Raspberry Pi

Hello,
 
To follow up to mindphuk's excellent piece on building the headless client on Raspberry Pi (https://www.reddit.com/blackcoin/comments/6gkjrw/wip_blackpi_a_stake_device_based_on_raspberry/), I thought if anyone was interested I'd show you how to get the full QT version running on the Pi on the Jessie with Pixel desktop. This works and has been soak tested for several days now on a standard Raspberry Pi 3. I have since added some coins and it stakes a handful of times a day.
 
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
 
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
 
These instructions assume you are starting from scratch with a completely blank OS.
 
Download Jessie with Pixel from: http://downloads.raspberrypi.org/raspbian/images/raspbian-2017-07-05/2017-07-05-raspbian-jessie.zip
 
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
 
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
 
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
 
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
 
sudo nano /etc/dphys-swapfile 
 
and Change the CONF_SWAPSIZE from 100 to:
 
CONF_SWAPSIZE=1024 
 
Exit nano with control + x to write out the file.
 
Then, run the following to restart the swapfile manager:
 
sudo /etc/init.d/dphys-swapfile stop sudo /etc/init.d/dphys-swapfile start 
 
Now, launch the browser and download the Lore 2.12 binaries for ARM here: https://mega.nz/#!k2InxZhb!iaLhUPreA7LZqZ-Az-0StRBUshSJ82XjldPsvhGBBH4 (Version with fee fix from 6 September 2017)
 
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
 
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
 
In the Terminal window, change directory to where you put the binaries, e.g.:
 
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x * 
 
That marks the binaries as executable.
 
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install 
 
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
 
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
sudo ldconfig 
 
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
sudo apt-get install qrencode libprotobuf-dev libevent-pthreads-2.0-5 
 
Now we need to install the Berkeley Database version 6.2.23. This is the version Lore v2 uses. Bitcoin still uses 4.8 which is 10 years old! This doesn't take too long.
wget http://download.oracle.com/berkeley-db/db-6.2.23.tar.gz tar -xvzf db-6.2.23.tar.gz cd db-6.2.23/build_unix ../dist/configure --prefix=/usr --enable-compat185 --enable-dbm --disable-static --enable-cxx 
 
I find this next section of the Berkeley instructions worked better just switching to root, which can be fudged by running sudo su before the rest:
sudo su make make docdir=/usshare/doc/db-6.2.23 install chown -v -R root:root /usbin/db_* /usinclude/db{,_185,_cxx}.h /uslib/libdb*.{so,la} /usshare/doc/db-6.2.23 
 
Now we're going to go up a couple of directories to where the binaries were:
cd ../.. 
 
Then run the client!
./bitcoin-qt 
 
And there you have it. Should hopefully end up looking a bit like this: http://imgur.com/a/eEHGa
 
Using the Bootstrap can save a while syncing. Download it at: https://www.reddit.com/blackcoin/comments/6b3imq/blackcoin_bootstrapdat_up_to_block_1631800
 
Place the bootstrap.dat file into the ~/.lore directory.
 
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
 
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop 
 
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None; 
 
Power usage and payback time
 
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
 
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
 
Securing your Pi
 
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
 
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
 
passwd 
 
You'll be prompted to enter the old and the new passwords.
 
Security by default
 
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
 
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
 
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable 
 
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
 
ifconfig 
 
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
 
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
 
You can query the status of the firewall like this:
ufw status 
 
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
 
Back up & Recovery
 
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
 
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
 
~/.lore 
 
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
 
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
 
In Windows, one way is to use Bitlocker drive encryption for the entire drive. You should follow the instructions here to encrypt your flash drive before your wallet.dat is on there, and don't forget the password!!
http://infosec.nmsu.edu/instructions-guides/how-to-enable-bitlocker-to-go-for-external-hard-drives-and-usb-flash-drives/
 
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale   There are almost certainly free packages with similar functionality, I have just used that one for years.
 
Either way, if you want to just make sure your USB drive is encrypted, you can do so in one-click in Finder before you put the sensitive files on it: http://lifehacker.com/encrypt-a-usb-stick-in-finder-with-a-click-1594798016
 
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
 
Recovery
 
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
 
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
./bitcoin-qt -rescan 
 
And if that doesn't do the job, do a full reindex of the blockchain:
 
./bitcoin-qt -reindex 
 
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
 
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
 
In the meantime, feel free to comment with your best practices.
 
submitted by patcrypt to blackcoin [link] [comments]

Why is installing peercoin qt in linux live session so hard?

Hi,
I'm trying to do a USB Live Session fresh install on my OSX comp, using ubuntu 12.04. I want to install the peercoin client offline to generate an offline wallet which can then be encrypted and moved to a USB key, and later imported to peercoin on my Mac when I want to spend the coins.
My question is whether or not I have to connect to the Internet in the liveUSB to actually do this successfully? Because I'm having an amazing amount of trouble doing this (nights and nights of frustration) when I'm not connecting to the internet.
In general I don't think that I'm technically disinclined, but this is absolutely stumped me. I'll outline my steps that I've done so far.
1- I've made the USB system and can boot no problem. I always choose to "test ubuntu without installing" since when I tried installing it wanted to overwrite my OSX
2- I unpack the tar.gz and I can't actually follow the install instructions coming with Peercoin (ppcoin-0.3.0-linux.tar.gz is the file I downloaded) below:
First, make sure that the required packages for Qt4 development of your distribution are installed, for Debian and Ubuntu these are: apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \ libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \ libssl-dev libdb4.8++-dev then execute the following: qmake make Alternatively, install Qt Creator and open the `bitcoin-qt.pro` file. 
I cant install the required packages in order to unpack everything. All of the threads I read about detail steps AFTER installing, so it seems like I just am braindead and can't even get to the point others start to have difficulty.
I also cannot install a QT creator, which the system suggests I try to do to create a graphical user interface. I've also followed the instructions here, as to how to install QT creator, but to absolutely no avail. The command line either says there is no file, or nothing happens. I followed the instructions here, as to how to unpack a file with a .bin extension but when I do that nothing happens either.
I guess my question is, why is this so hard for me? Everything that I read suggest that the best kind of off-line wallet is done on a system that is never connected to the Internet. But if I can't install anything without connecting to the Internet, how can I get to the point where I can even generate a Wallet?
This link on github suggests I should be connected to the internet
Is anybody aware of an ultra descriptive linux/ubuntu 12.04 fresh install set of instructions? Something like this I think would be incredibly valuable to the community, and if I ever figure it out on my own, I will absolutely make it. I feel like this is limiting me from getting completely set up with peercoin.
I can just generate private keys offline (I think, honestly I haven't tried running the html files I've downloaded because I'm fighting with ubuntu (bitaddress.org, brainwallet.org, etc)). But since I am using OS X, there doesn't appear for me to be any way to actually import a generated private key/address at this point into the OSX peercoin client to generate a new wallet. Is there?
Any help is very very appreciated, thanks very much. Also, should I double post this at peercointalk.org? I'm more familiar with Reddit :)
*edit 1 - fixed formatting
submitted by tomatoesrfun to peercoin [link] [comments]

Sure Bitcoin is safe Grandma. This is all you have to do to really secure your money

THIS IS FUCKED. BITCOIN HAS NO FUTURE IF WE CAN'T FIND A BETTER WAY TO MAKE IT SECURE. MAIN STREET WILL RUN A MILE FROM IT.
Xpost from: http://www.reddit.com/Bitcoin/comments/1d26gw/cold_storage_how_i_did_it/
With the recent events surrounding blockchain.info wallet attacks, I decided to bite the bullet and send all my coins to my cold wallet. It's a bit nerve wrecking but I managed. Here's what I did:
Download offline version of Armory here[1] (section Linux – Offline Bundle for Ubuntu 10.04)
Download Brainwallet source from github[2] for signing transactions, rather than the suggested way from armory website, since I don't want to run a full Bitcoin-qt client + armory to create an unsigned tx. More on this later
Prepare a USB pendrive for linux here[3] using the suggested Ubuntu 10.04 by Armory.
Boot into Linux using that pendrive. Install the Armory software and generate a new wallet. Make sure you make appropriate backup (paper copy or just write down the seed). You can always regenerate your entire wallet via brainwallet.org copy (tab Chains).
If you want, make a watch only copy of your wallet, and you can get all the public address in that wallet from your online computer via Armory offline version. Save the watch only wallet on your windows partition.
Reboot into windows/mac/your main OS.
Install armory and import the watch only wallet to see all of your addresses.
Try to move a small fund into one of the cold-storage addresses. Wait for it to have 6 confirmations. Then we can try to spend that fund by doing the following:
Get unspent output from your cold-storage address: https://blockchain.info/unspent?address=[4] Copy the output into a text file, leave it on your windows machine. Linux copy will be able to read this file.
Boot back into linux on your pendrive. Use saved brainwallet.org website to sign that transaction (use tab Transaction) by pasting the private key of the address (get from Armory, without space) and the unspent output. Sign the message. Then save the output to the same txt file.
Boot back into your main OS. Paste that signed output to http://blockchain.info/pushtx[5] and push it. You're good to go. You spent your fund in your cold storage.
Now, move everything you have from your online storage there.
submitted by BitCoinWarrior to Bitcoin [link] [comments]

[TUTORIAL:] Creating a custom wallet. Part 1: Proof of concept.

Download and view this tutorial on GITHUB
I'm teaching myself the technical aspects of Bitcoin. I decided to start by making a custom wallet. Here is my quick and dirty proof of concept using Python, bitoinrpc, and PyQt.
So far, this only queries bitcoind for getinfo. It's only a stepping stone to the greater application.
I'll make more tutorials as the program develops. Please feel free to comment and ask questions. Keep in mind, Python isn't my primary language. I decided to go with Python only because I could use the practice.
I wrote this using Linux. It should work on Windows / Mac, but your mileage may vary. To use this, you are going to need Python 2.7 installed on your machine (obviously) as well as the dependent libraries: PyQt, Python bitcoinrpc, and json. Copy and paste the code in a file somewhere and run
$ python  
Change "rpc_username" and "rpc_password" to match that of ~/.bitcoin/bitcoin.conf
Make sure ./bitcoind -server is running
If everything is set up correctly you should see a gui app appear with the same information as if you were to run bitcoind getinfo from the command line.
#!/usbin/python # -*- coding: utf-8 -*- import sys from PyQt4 import QtGui from bitcoinrpc.authproxy import AuthServiceProxy import json class Configuration(): def __init__(self): self.protocol = "http" self.username = "rpc_username" self.password = "rpc_password" self.ip = "localhost" #self.port = "18332" self.port = "8332" def get_uri(self): self.uri = self.protocol+"://"+self.username+":"+self.password+"@"+self.ip+":"+self.port return self.uri class Command(): def __init__(self): self.conf = Configuration() self.access = AuthServiceProxy(self.conf.get_uri()) def get_info(self): self.info = self.access.getinfo() #self.info = self.access.listaccounts() return self.info class UI(QtGui.QWidget): def __init__(self): super(UI, self).__init__() self.init_ui() def init_ui(self): command = Command() info = command.get_info() keys = info.keys() label = [] line_edit = [] for (i, key) in enumerate(keys): label.append(QtGui.QLabel(str(keys[i]))) line_edit.append(QtGui.QLineEdit(str(info[keys[i]]))) grid = QtGui.QGridLayout() grid.setSpacing(10) for (i, item) in enumerate(label): grid.addWidget(label[i], i, 0) grid.addWidget(line_edit[i], i, 1) self.setLayout(grid) self.setGeometry(300, 300, 350, 300) self.setWindowTitle('getinfo') self.show() def main(): app = QtGui.QApplication(sys.argv) ex = UI() sys.exit(app.exec_()) if __name__ == '__main__': main() 
Features of note:
In the future I may just link to a github account. Time permitting.
Let me know what you think. Thanks!
submitted by Joshka to BitcoinDevelopers [link] [comments]

4. Installing Bitcoin Core on Linux How to Install a BitPay Wallet on Linux How to install Bitcoin on Ubuntu 16.04 Install Qt Creator in Ubuntu 14.04 LTS How to Install Bitcoin Core Wallet on Ubuntu 16

Bitcoin-Qt ist ein Open-Source-Projekt und derzeit einer der sichersten Vertreter unter den Mining-Clients. Hier müssen Sie sich nicht um eventuelle Angriffe auf Ihr virtuelles Geld sorgen. Ebenfalls Open-Source und vertrauenswürdig ist Electrum.Das Tool punktet mit einer 2-Faktor-Authentifizierung, dem Support von Add-ons und der Möglichkeit, Ihre Keys jederzeit in andere Bitcoin-Clients ... Drag the Bitcoin icon to the desired install location, and double-click the icon to run the application. Initialization. The Bitcoin window will open and connections will start up in minutes. The blocks will begin downloading. At this point, it is recommended to encrypt your wallet before receiving any bitcoins. Encrypting later may leave ... Bitcoin software has both a graphical interface called bitcoin-qt and a console interface, bitcoind. If the first is convenient for human use, then without a text it is quite difficult to make an online store or any other service that accepts bitcoins as a payment. About it and speech will go. To work you need to run one instance of bitcoin as a daemon, so he worked as a full-fledged host on ... The Bitcoin Core daemon (bitcoind) is not included in the .dmg file you may have downloaded to install Bitcoin-QT. Bitcoind, along with its support binaries, is instead included in the OS X .tar.gz file listed on the official Bitcoin Core download page. To download this file using Terminal, execute the following command: Bitcoin Core ist ein gemeinschaftliches, freies Software-Projekt, veröffentlicht unter der MIT-Lizenz. Release-Signaturen überprüfen Download über Torrent Quelltext Versionshistorie anzeigen Bitcoin Core Release Signierschlüssel v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+

[index] [10608] [4223] [37123] [19830] [40862] [51330] [9033] [38435] [3416] [25969]

4. Installing Bitcoin Core on Linux

Wallet installation of VERGE on Ubuntu 15.1. Includes wallet installation, creation of a desktop launcher and wallet encryption To add the PPA and install Bitcoin open a terminal window (press Ctrl+Alt+T) and copy+paste the following lines: sudo apt-add-repository ppa:bitcoin/bitcoin -y sudo apt update && sudo apt install ... Installing and Configuring QT Creator Ubuntu Installing QT Creator Installing Qt Windows Mac Linux How to install and use the Qt SDK How to install Qt SDK and Qt Creator Qt4 tutorial for absolute ... How to install Bitcoin on Ubuntu 16.04 On this video, I will show you how to install Bitcoin on Ubuntu 16.04 Commands sudo apt-add-repository ppa:bitcoin/bi... Bitcoin Core is the open source client of the bitcoin cryptocurrency. Initially, the software was published by Satoshi Nakamoto under the name Bitcoin, then Bitcoin-Qt and later renamed to Bitcoin ...

#